Here are descriptions of every setup item:
Band
Main ESSID
Site Survey
WLAN MAC
Please select the wireless band you wish to use. By
selecting different band setting, you'll be able to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz
(G), only wireless clients using the wireless band
you select (802.11b, 802.11 Draft-N, or 802.11g)
will be able to connect to this range
extender/access point.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this range extender/access point.
If you want to allow 802.11b, 802.11g, and 802.11
Draft-N clients to connect to this range
extender/access point, select 2.4GHz (B+G+N).
Please input the ESSID (the name used to identify
this wireless range extender/access point) here.
You can input up to 32 alphanumerical characters.
PLEASE NOTE
SENSITIVE.
When you use this range extender/access point as
a wireless station for Ethernet network device to
have wireless capability, you have to associate it
with a working range extender/access point. Click
'Select Site Survey' button, then a "Wireless Site
Survey Table" will pop up. It will list all available
range extender/access points near by. You can
select one range extender/access point in the table
and it will join wireless LAN through this range
extender/access point. Please go to Section 2-4-2-1
for more information about the 'Wireless Site
Survey Table'.
For some applications, you may need to designate
a specific MAC address for the range
28
THAT ESSID IS CASE