Adjusting The Clutch Free Play; Adjusting The Brake Lever Free Play - Yamaha TT-R50E Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Adjusting the clutch free play

The clutch free play must be checked
and, if necessary, adjusted as follows
at the intervals specified in the periodic
maintenance and lubrication chart.
1. Remove the
screw cover by removing the
screws.
7
1. Screw
2. Clutch adjusting screw cover
2. Loosen the locknut.
3. Slowly turn the clutch adjusting
screw in direction (a) until resis-
tance is felt, and then turn it 1/8
turn in direction (b).
EAU46251
clutch adjusting
1. Locknut
2. Clutch adjusting screw
4. Tighten the locknut to the specified
torque.
Tightening torque:
Locknut:
TIP
When tightening the locknut, hold the
clutch adjusting screw with a screwdriv-
er so that it does not turn together with
the locknut.
5. Install the clutch adjusting screw
cover by installing the screws.
6 Nm (0.6 m·kgf, 4.3 ft·lbf)
7-15
Adjusting the brake lever free
play
1. Brake lever free play
The brake lever free play should mea-
sure 10.0–20.0 mm (0.39–0.79 in) as
shown. Periodically check the brake le-
ver free play and, if necessary, adjust it
as follows.
To increase the brake lever free play,
turn the brake lever free play adjusting
nut at the brake shoe plate in direction
(a). To decrease the brake lever free
play, turn the adjusting nut in direction
(b).
EAU22131
1