Speed Limiter - Yamaha TT-R50E Owner's Manual

Engine stop switch " /
Set this switch to " " before starting
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch " "
Push this switch to crank the engine
with the starter. See page 6-1 for start-
ing instructions prior to starting the en-
gine.
INSTRUMENT AND CONTROL FUNCTIONS
EAU12660

Speed limiter

"
Your motorcycle is equipped with an
" to
adjustable speed limiter. The speed
limiter keeps the throttle from fully
opening, even when the throttle grip is
turned to the maximum.
1. Loosen the locknut.
EAU12711
2. To increase the maximum engine
power available and the maximum
speed of the motorcycle, turn the
adjusting screw in direction (a). To
decrease the maximum engine
power available and the maximum
speed of the motorcycle, turn the
adjusting screw in direction (b).
1. Locknut
2. Adjusting screw
3. Tighten the locknut.
EAU39864
1. No more than 28 mm (1.1 in)
Improper adjustment of the speed
limiter could cause improper throttle
operation. You could lose control,
have an accident or be injured. Do
not turn the adjusting screw out
more than 28 mm (1.1 in). Always
make sure the throttle grip free play
is adjusted to 3.0–5.0 mm (0.12–0.20
(b)
in). (See page 7-12.)
(a)
1 2
4-2
1
WARNING
4
EWA14403