Honda XR125LK Owner's Manual page 112

12/04/20 17:10:14 32KRHA20_112
Rear Wheel Installation
Reverse the removal procedure.
Install the side collar into the left side
wheel hub.
Make sure that the lug (
swingarm ( 12 ) is located in the slot (
in the brake panel ( 14
Tighten the rear axle nut to the specified
torque:
93 N·m (9.5 kgf·m , 69 lbf·ft)
Adjust the drive chain (page
rear brake pedal freeplay (page
After installing the wheel, apply the
brakes several times, and check for free
wheel rotation when released.
If a torque wrench is not used for
installation, see your dealer as soon as
possible to verif y proper assembly.
Improper assembly may lead to loss of
braking capacity.
102
11 ) on the
13 )
).
88 ) and
29 ).
(11) Lug
(12) Swingarm
(14) (13) (11)
(13) Slot
(14) Brake panel
(12)