Determining Wall Plate Location - GE JVM2052 Installation Instructions Manual

DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
C
Plate position – beneath flat bottom
cabinet
Plate position – beneath recessed bottom
cabinet with front overhang
Installation Instructions
Mounting Plate Tabs
Touching the Cabinet Bottom
Mounting Plate with
Tabs Below Cabinet
Bottom the Same
Distance as the Front
Overhang Depth
30" to Cooktop
9
Plate position – beneath framed recessed
cabinet bottom
Your cabinets may have decorative trim that interferes
with the microwave oven installation. Remove the
decorative trim to install the microwave oven properly
and to make it level.
THE MICROWAVE OVEN MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets have a front overhang only, with no
back or side frame, install the mounting plate down
the same distance as the front overhang depth.
This will keep the microwave oven level.
1 Measure the inside depth of the front overhang.
2 Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside depth
of the front overhang.
For this type of installation with front overhang only,
3
align the mounting tabs with this horizontal line, not
touching the cabinet bottom as described in Step D.
Mounting Plate Tabs
Touching the Back
Frame
30" to Cooktop