Check For Gas Leaks - Weber Summit 650 Step-By-Step Manual

CHECK FOR GAS LEAKS

WARNING
The gas connections of your Weber Gas
Barbecue have been factory tested. We do
however recommend that you leak check
all gas connections before operating your
Weber Gas Barbecue.
Remove burner control knobs, control
panel(1) and front panel(2)
Remove the burner control knobs. The control panel(1) is
separate from the front panel(2). The control panel needs
to be removed before the front panel can be removed.
(1)
(2)
Summit 450
(1)
(2)
Summit 650
Put your fingers under the front edge of the control panel
and lift up and pull evenly toward you.
Front edge of the
control panel
Front edge of the
control panel
12
Summit 450
Front Panel
Control Panel
Summit 650
Front Panel
Control Panel