Yamaha YZ250F(W) Owner's Service Manual page 384

OIL FILTER ELEMENT, WATER PUMP AND RIGHT
CRANKCASE COVER
2. Install:
• Right crankcase cover 1
• Bolt (right crankcase cover) 2
NOTE:
• Apply the engine oil on the impeller shaft
end.
• Mesh the impeller shaft gear 3 with primary
drive gear 4.
• Tighten the bolts in stage, using a crisscross
pattern.
Kickstarter crank
1. Install:
• Kickstarter crank 1
• Washer
• Bolt (kickstarter crank)
NOTE:
Install so that there is a clearance a of 5 mm
(0.20 in) or more between the kick starter and
frame and that the kick starter does not contact
the crankcase cover when it is pulled.
2. Install:
• Oil hose 1
• Bolt (oil hose) 2
3. Install:
• Copper washer 1
• Oil delivery pipe 2
• Union bolt (M8) 3
• Union bolt (M10) 4
4 - 62
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
33 Nm (3.3 m · kg, 24 ft · lb)
8 Nm (0.8 m · kg, 5.8 ft · lb)
18 Nm (1.8 m · kg, 13 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)