Invacare Tracer IV Heavy Duty User Manual page 40

5 FRONT RIGGINGS
8. Perform one of the following as shown in Detail "A":
• Footplates With Spring Buttons: Ensure that the release buttons fully protrude from holes on both sides of the upper footrest support.
• Bolt-In-Place Footplates:
i. From the outside of the swingaway front rigging, insert the threaded rivet through both the front rigging support and the footplate
assembly.
ii. From the inside of the swingaway front rigging, insert the button head screw through the appropriate adjustment hole and thread into
the threaded rivet.
iii. Using a screwdriver to hold the threaded rivet in position, securely tighten the button head screw. Torque to 32 in-lbs.
9. Rotate cam lock lever down to locked position.
Footplates with Spring
Buttons
Front Rigging
Support
Release Button
Footplate
Assembly
Adjustment
Holes
Cam Lock
Lever

Swingaway footrest shown.
Invacare® Tracer IV®Heavy Duty/Extra Wide Wheelchair
DETAIL "A"
Bolt-in-Place Footplates
Threaded
Rivet
Inside of
Swingaway
Front Rigging
Footplate
Assembly
FIGURE 6 Replacing Heel Loop
Front Rigging
Front Rigging
Support
Support
Button Head
Screw
Cam Lock
Lever
Adjustment
Hole
Outside of
Swingaway
Front Rigging
40
Mounting
Screw
Threaded
Rivet
Spacer
Footplate
Assembly
Locknut
Cam Lock
Lever
Heel Loop
Slide
Tube
Footplate
Part No. 1110558