Invacare Pronto M91 Owner's Manual page 67

SECTION 11—BATTERIES
CAUTION
DO NOT use an independent charger with an output rating of over 8A (amps).
Otherwise, damage may occur.
NOTE: For this procedure, refer to FIGURE 11.5 on page 67.
NOTE: The charger port located on the Front of the joystick requires the use of an independent
charger. The independent charger is NOT supplied with the wheelchair.
Required Items: Battery Charger*, Power Cord**
*NOTE: Item not supplied.
**NOTE: AC power cord (3‐prong plug, 15 ampere current rating; industrial type).
Wheelchair with MK SPJ‐80/DPJ/MPJ/SPJ+ joystick:
5
1. Attach the battery charger connector to the charger port on the front of the joystick.
2. Plug the charger's AC power cord or extension into the grounded 110‐volt wall outlet.
3. Unplug the AC power cord or extension once charging is complete.
Charger/
Programming
Port
FIGURE 11.5 Independent Charger
67
Part No 1141450 Pronto® M91™ with SureStep®