HP Surestore Tape Library Model 10/180 Manual page 18

Label
é
Also called volser.
é
Valid characters are A-Z, 0-9, # (crosshatch), or trailing blanks.
é
Leading blanks are not permitted.
Library Name
This is the assigned name that maps to the Internet Protocol (IP) address for a library. The library name is
assigned by your system administrator.
Library Report
The library report function generates a report that consists of the following information:
é
Library name
é
Library serial number
é
Number of CAPs in the library
é
Number of panels in the library
é
Number of drives
é
Library status, such as Ready
é
Revision information
é
Network settings
é
Device ID's
Media Type
The valid media types are :
é
DLT IV (DLT 8000)
é
9840
é
LTO Ultrium1 (LTO Ultrium)
Mount/Dismount
During the Mount/Dismount, the tape is inserted in (mounted) and removed from (dismounted) from a drive
in order to test the functionality of the drive.
The maximum number of loops allowed is 200.
Position
A position is the cell location by panel, row, and column.
Put
A put is when the robotic hand loads a cartridge into a storage cell.
Reserved Cells
The cells in the library in which only cleaning cartridges, diagnostic cartridges, or swapped data cartridges
may reside. Only one of these cells is a swap cell.
Do not insert a data cartridge in a reserved cell, or the library will not see the cartridge.