Table of Contents
Advertisement
Diagnostics 67
Move Media Screen
The Move Media command is a good way to access the DLT Tape Library
from remote locations to determine the health of the robotic controller,
mechanical mechanisms and the Load & Unload ability of the DLT Drives.
Caution should be taken to ensure that scratch media is used in testing the
Move Media commands. Any time a tape is loaded and unloaded in a DLT
drive, there is the possibility of destroying stored data or the actual media
itself. Selections can be made to return the media to it s original position or
leave it in the drives. Care should be taken to return media to its original
position to ensure the integrity of bar code element status and application
software inventory requirements.
Figure 6-13. Move Media command screen
Advertisement
Table of Contents
