Access Requirements - HP Integrity Superdome 2 16-socket User Manual

IMPORTANT:
Administrator GUI if you have complex firmware earlier than the Online Firmware Update
firmware release.
To update complex firmware if you have complex firmware earlier than the Online Firmware
Update firmware release, see the "Update Firmware" section in the HP Integrity Superdome
2 Onboard Administrator Command Line Interface User Guide.

Access requirements

To access the HP Superdome 2 Onboard Administrator web interface, you require the Onboard
Administrator IP address and a compatible web browser. You must access the application through
HTTPS (HTTP packets exchanged over an SSL-encrypted session).
The Superdome 2 Onboard Administrator web interface requires an XSLT-enabled browser with
support for JavaScript 1.3 or the equivalent.
The following browsers are officially supported for use with Onboard Administrator:
Microsoft Internet Explorer 7.0 or later
Mozilla Firefox 2 or later
NOTE: Other browsers can be used but are not supported.
Before running the application, you must enable the following browser settings:
ActiveX (for Microsoft Internet Explorer)
Cookies
JavaScript
If you receive a notice that your browser does not have the required functionality, be sure that your
browser settings meet the preceding requirements and see
(page 17).
To access the HP Superdome 2 Onboard Administrator CLI, use the Onboard Administrator IP
address and a terminal or terminal application. To access the CLI interface, you must use Telnet
or Secure Shell depending on which of these protocols are enabled.
To access the CLI management and notification features, the ports listed on the following table
must be open on any router between Onboard Administrator and any computers used to access
or monitor Onboard Administrator.
Protocol
Secure Shell
Telnet
SMTP
Browser access
Browser access encrypted
SNMP get/set
SNMP traps
LDAP
Terminal services pass-through from
PC to OA
10 Introduction
You cannot update firmware through the HP Superdome 2 Onboard
Incoming port
22
23
80
443
161
3389
"Recovering the administrator password"
Outgoing port
25
80
443
162
636