Running The Insight Display Installation - HP Integrity Superdome 2 16-socket User Manual

When the enclosure UID is on, the Insight Display flashes after two minutes of inactivity.
Pressing any button on the Insight Display stops the blinking and reactivates the screen.
Green— The Insight Display illuminates green when no error or alert conditions exist, and the
enclosure is operating normally.
After two minutes of inactivity, the Insight Display light turns off. Pressing any button on the
Insight Display reactivates the screen.
Amber— The Insight Display illuminates amber when the Onboard Administrator detects an
issue or alert condition. The screen displays the details of the condition.
After two minutes of inactivity, the Insight Display flashes amber indicating that an error or
alert condition exists. If the enclosure UID is on and an error or alert condition exists, the
Insight Display illuminates blue as the enclosure UID takes priority over the alert. Pressing any
button on the Insight Display reactivates the screen.
Dark (no power)— The Insight Display has a two-minute inactivity period. If no action is taken
and no alert condition exists, the screen light turns off after two minutes. Pressing any button
on the Insight Display reactivates the screen.
The Enclosure Health icon is located at the bottom-left corner of every screen, indicating the condition
of the enclosure health. Navigate the cursor to the Enclosure Health icon and pressing OK to access
the Health Summary screen from any Insight Display screen.

Running the Insight Display installation

When the enclosure is powered on for the first time, the Insight Display launches an installation
wizard to guide you through the configuration process. After configuring the enclosure, the Insight
Display verifies that no installation or configuration errors are present. If errors are present, the
Insight Display guides you through the process of correcting the errors.
To identify the enclosure, the rear enclosure UID light and the background of the Insight Display
glow blue when the enclosure is powered on initially.
The Installation Wizard turns on the enclosure UID at the beginning of the installation and turns it
off after the installation is complete.
The Enclosure Settings screen is the first screen that appears. The background is blue, because the
enclosure UID is active when this screen appears.
1. Review each setting on the Enclosure Settings screen for accuracy.
2. To change any value, navigate the cursor to the menu option to be edited, and then press the
OK button.
3. Change the setting to the appropriate value, navigate the cursor to Accept, and then press
the OK button to return to the Enclosure Settings menu. Repeat this step until all options on the
Enclosure Settings menu are accurate.
Running the Insight Display installation 19