Viewing Zone Configuration Properties; Adding Zones To A Zone Configuration - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

20

Viewing zone configuration properties

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Potential Members list.
4. Right-click the zone configuration you want to review in the Zone Configs list and select
5. Review the zone configuration properties.
6. Click OK to close the Zone Config Properties dialog box.

Adding zones to a zone configuration

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select one or more zone configurations to which you want to add zones in the Zone Configs
5. Select one or more zones to add to the zone configurations in the Zones list. (Press SHIFT or
6. Click the right arrow between the Zones list and Zone Configs list to add the zones to the zone
582
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making
changes to the same areas.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning library
for the selected entity.
Properties.
The Zone Config Properties dialog box displays.
The following information is included in the zone properties:
•
Zone Config Name—The name of the selected zone configuration.
•
Number of Zones—The number of zones in the selected zone configuration.
•
Total Zone Members—The total number of zone members in the selected zone
configuration.
•
Unique Zone Members—The total number of zone members that are unique in the zone
configuration.
•
Status—The status of the selected zone configuration (active or not active).
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
list. (Press SHIFT or CTRL and click each zone configuration name to select more than one
zone configuration.)
CTRL and click each zone name to select more than one zone.)
configurations.
DCFM Professional Plus User Manual
53-1001774-01