Shortcut Menus - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Shortcut menus

You can use the Management application interface main menu to configure, monitor, and
troubleshoot your SAN components. The instructions for using these features are documented in
the subsequent chapters of this manual.
For each SAN component, you can optionally right-click the component and a shortcut menu
displays. The table below details the command options available for each component.
Component
FC Fabric or Backbone Fabric
DCFM Professional Plus User Manual
53-1001774-01
Menu/Submenu Commands
Zoning
LSAN Zoning (Device Sharing)
Performance >
End-to-End Monitors
Real-Time Graph
Historical Graph
Historical Report
Events
Configure FCIP Tunnels
High Integrity Fabric
Fabric Binding
Router Configuration
Routing Domain IDs
Technical Support >
Switch/Host SupportSave
Upload Failure Data Capture
View Repository
View >
Port List
Node List
Track Fabric Changes check box
Accept Changes
Trace Route
Connected End Devices >
Include Virtual Devices check box
Hide All
Show All
Custom
MyCustomList
Create Meta SAN View
Create View Automatically
Map Display
Application menus
Comments
Only enabled for Backbone fabrics.
Only launches the wizard when FCIP-capable
switches are in the selected fabric.
Only available for Backbone fabrics.
Automatically creates a view with the selected
fabric. View name is same as the current
label.
A
645