HP Carrier-grade cc2300 Product Manual page 20

Item Feature
D Major (amber or red)
E Minor (amber)
F Power (amber)
G Disk 1 Activity/Fault LED
(green/amber or red)
H Disk 2 Activity/Fault LED
(green/amber or red)
I Main power LED (green)
J NIC0/NIC1 activity LED
(green)
K System ID LED (white)
Figure 2-3 shows the front view of the server with the bezel removed.
Figure 2-3. Front View with Bezel Removed
Peripheral Bay
Drive Bay 2
88
When continuously lit, indicates the presence of a major system
fault. A major system fault is an error or event that is detected by
the system that has discernable impact to system operation. In this
case, the system can continue to operate but in a degraded fashion
(reduced performance or loss of nonfatal feature reduction). An
example could be the loss of one of two mirrored disks. The front
panel major alarm relay will be engaged.
When continuously lit, indicates the presence of a minor system
fault. A minor system fault is an error or event that is detected by
the system but has little impact to actual system operation. An
example would be a correctable ECC error. The front panel minor
alarm relay will be engaged.
When continuously lit, indicates the presence of a power system
fault. The front panel power alarm relay will be engaged.
Front Panel Status LEDs
Indicates disk 1 SCSI hard drive activity when green, or a disk 1
SCSI hard drive fault when amber or red.
Indicates disk 2 SCSI hard drive activity when green, or a disk 2
SCSI hard drive fault when amber or red.
When continuously lit, indicates the presence of DC power in the
server. The LED goes out when the power is turned off or the power
source is disrupted.
Indicates activity on either NIC0 or NIC1.
Indicates any system SCSI hard drive activity.
Front Panel Control
Switches and Status LEDs
Drive Bay 2 SCSI Connector
Engagement Lever
Description
RJ45 COM2 and
Dual USB Connectors
Drive Bay 1
Drive Bay 1 SCSI Connector
Engagement Lever
TP181
Chapter 8