Conrep Return Codes - HP BL860c Deployment Manual

</section>
<section name="EFI_Non-Cell_variables">
<ev>AutobootRetry</ev>
</section>
<section name="EFI_Cell_variables">
<ev>AutobootRetries</ev>
</section>
</conrep>
Table 6-4 conrep Return Codes
Value Meaning
0
conrep executed
successfully
1 Permission denied
2 Usage error
3 The conrep.dat file not
found
4 Error generating hash
information to the
conrep.dat file
5 The conrep.datfile is
corrupted
6 At least one EFI variable
described in the
conrep.dat file was not
found in the system.
7 Error writing an EFI
variable
8
The conrep.xml file was
not found
9 At least one EFI variable in
the file was not found in
the system.
10 Error reading an EFI
variable
11 Error writing to the
conrep.dat file
Cause
The user is not a system
administrator.
An error occurred while using
conrep for some unexpected
reason, such as the wrong
parameters.
The specified conrep.dat file
does not exist.
This error occurs only if conrep
cannot allocate memory to be used
to calculate the hash value for the
conrep.dat file.
The contents of the conrep.dat
file and the hash information do
not match.
The machine used to capture the
EFI variables and generate the
conrep.dat file has some EFI
variables that do not exist in the
current system.
The user does not have permission
to write in the raw_var file in the
/sys/firmware/efi/vars/
VAR_NAME-GUID directory.
There is no conrep.xml file in the
current directory.
The conrep.xml file has some
variables that do not exist in the
current system. Conrep cannot
capture these variables.
The user does not have permission
to read the raw_var file in the
/sys/firmware/efi/vars/
VAR_NAME-GUID directory.
The user does not have permission
to write to the conrep.dat file.
Action
Log in as root to run conrep.
Run conrep -h to get help using
conrep.
Put the specified conrep.dat file in
the correct directory.
Generation another conrep.dat file.
This is not an error, only a warning.
No action is required.
No action is required. The variable is
not written and conrep continues to
execute.
Create a conrep.xml file with the EFI
variables that should be read from
NVRAM.
No action is required. This is not an
error, only a warning.
If root does not have permission to
read the raw_var file of an EFI
variable, this variable must be
removed from conrep.xml.
Change the permissions of the
conrep.dat file.
conrep 51