Using The Optional Ac Adapter - LifeSource UA-851 Instruction Manual

The UA-851 has an AC adapter jack to allow you to supply power from an
outlet in your home. We recommend you use only the optional LifeSource AC
adapter to avoid potential damage to the monitor. To purchase the optional
AC Adapter, please contact our LifeSource Health Line at 1-888-726-9966.
Connecting the AC adapter to the monitor:
1. Gently insert the AC adapter plug into a 120V AC outlet.
2. Connect the AC adapter plug into the jack on the back of the monitor.
Disconnecting the AC adapter from the monitor:
1. Turn the unit off by pressing the START button.
2. Disconnect the plug from the jack of the monitor quickly.
3. Gently remove the AC adapter from the outlet.
NOTE: If monitor has batteries and an AC adapter connected, the
measurements stored in memory will be lost if AC adapter is unplugged from
the wall first. To ensure that measurements remain in memory, make sure the
unit is off and that the jack plugged into the monitor is removed quickly before
unplugging adapter from the wall.
LifeSource Health Line (Toll-Free): 1-888-726-9966

USING THE OPTIONAL AC ADAPTER

Jack
Plug
AC Adapter
E-11