Sound System; External Monitor - Toshiba AT300 User Manual

Problem
You cannot read a
file
USB device
In addition to the information in this section, please also refer to the
documentation supplied with your USB device.
Problem
USB device does not
work

Sound system

In addition to the information in this section, please also refer to the
documentation supplied with your audio device.
Problem
No sound is heard

External monitor

Please also refer to the documentation supplied with your monitor for
further information.
Problem
Monitor does not
turn on
No display
User's Manual
Procedure
Check to ensure the required file is actually on the
memory media card that is inserted into the tablet.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Procedure
Remove the USB device from the convert cable
and reconnect it to ensure it is firmly attached.
Procedure
Adjust the volume.
Check the software volume settings.
Please check to see if system sound is muted.
Check to make sure the headphone connection is
secure.
Procedure
After confirming that the monitor's power switch is
on, you should check the connections to make
sure that the power cord/adaptor is firmly
connected to the monitor and to a working power
outlet.
Try adjusting the contrast and brightness controls
on the external monitor.
TOSHIBA AT300
8-3