Turning On The Power - Toshiba AT300 User Manual

2.
3.
You can charge the tablet by connecting the power cable to a USB port on
a computer. However it is not recommended because it takes much more
time to fully charge the battery.

Turning on the power

This section describes how to power up your tablet.
Press & hold Power button to turn on the tablet. The tablet will vibrate to
indicate the status.
User's Manual
Figure 3-3 Connecting the AC adaptor 1
Plug the power connector of the power cable into the docking interface
on your tablet.
Figure 3-4 Connecting the AC adaptor 2
Plug the AC adaptor into a live wall outlet.
Figure 3-5 Turn on the tablet
TOSHIBA AT300
2-pin
3-pin
3-9