LIP-8012D & LIP-8024D User Guide
To place a call on Hold:
•
Press
5.3
Broker Call: Switching between two calls
To switch between two calls (Broker Call):
•
Press the desired CO/IP line button.
5.4
Joining Multiple People in a Conference
To establish a Conference:
•
Establish call with one of the desired conference
parties,
•
Select the Conf Soft button,
•
Establish call with the other conference party,
•
Select the Conf Soft button,
•
Select the Conf Soft button again to establish the
conference.
To place a Conference on Hold:
•
Press the
To retrieve the Conference from Hold:
•
Select the Conf Soft button.
.
/
HOLD
SAVE
You may switch between the active call and a call on
Hold, placing the active call on Hold acting as a broker
between two or more parties, Broker Call.
Phone users may 'broker' for multiple calls up to the
number of CO/IP line buttons.
You can establish a Conference with up to 3 parties, or
24 parties when using a Multi-Party Conference
Interface Module (MCIM).
Conference may be internal or external.
A Conference can be placed on Hold and is subject to
Hold
Recall.
You may also use the Conference operation to join 2
external parties in a private conversation. This is an
Unsupervised Conference, which is not subject to the
normal Hold Recall operation.
button.
/
HOLD
SAVE
The other parties in the
36
Issue 1
iPECS
August, 2008