Table of Contents
Advertisement
LIP-8012D & LIP-8024D User Guide
3. Receiving Calls
To answer a call ringing at your phone:
•
Lift the handset or press the flashing Flex button (as
needed), the call will be connected.
To respond to an Intercom Voice Announce call:
•
In HF mode, simply speak as normal into the
microphone,
•
OR
•
In PV mode, lift the handset to respond.
3.1
Answering a Call While Idle
There
are
3
internal/external
Announce calls, and
Your
phone
may
Preference; in this case, calls that ring are answered by
lifting the handset.
flashing Flex button.
External calls to an iPECS Phone will appear under the
CO/IP line or a LOOP button.
External calls are from CO lines or VoIP channels that
are programmed to ring at your phone. For external
calls, Delay Ring may be assigned allowing others to
answer the call before the call rings at your phone.
Calls can be forwarded in some manner from another
user; if providing call coverage for other users, you may
also receive Station Call Coverage calls.
Calls placed on Hold, including Transfers, parked calls,
etc. will recall if left on hold for too long.
ICM Voice Announce calls are answered based on the
ICM Signaling mode at the receiving phone; in Hands-
free
(HF)
mode,
announcement, speak normally into the microphone. In
the Privacy (PV) mode, lift the handset to respond. The
ICM Signaling mode can be assigned in
Programming.
The LCD will display the calling number or, if available,
the name of the station or CO/VoIP line, CO Line Name
Display.
3.
R
ECEIVING CALLS
basic
types
ringing
calls,
Hold
recalls.
be
assigned
Otherwise, you must press the
after
the
15
Issue 1
of
incoming
calls;
Intercom
Voice
Ringing
splash
tone
Station
August, 2008
Line
and
Hide quick links:
Advertisement
Table of Contents
