Using Automatic Called Number Redial (Acnr) - LG-Nortel LIP-8012D User Manual

LIP-8012D & LIP-8024D User Guide
To place a call using Dial by Name:
• Press DIR Soft button,
• Dial the desired directory, 1: Private directory, 2:
Public directory, 3: Intercom directory, the LCD will
display the names in alphabetical order,
• Scroll using the Navigation up/down keys, or enter
search characters (refer to the Character Entry Chart in
Section
• Press
To enter your station user name:
• Press the
• Dial 74 (Station User Name code),
• Enter the Name, up to 12 characters (press DND
button to backspace/delete a character). To input
characters:
• Press the second Soft button to select ABC> or abc>
mode,
• To input the first character of a button, press the
button 1 time (ex., for 'a', press 2 button once),
• To input the second character of a button, press the
button 2 times (ex., for 'b', press the 2 button twice.
• To input the third character of a button, press the
button 3 times (ex., for 'f', press the 3 button three
times.
• Press
NOTE—To allow others to contact you via the
Intercom directory, you must enter a name for your
station (up to 12 characters).
4.3.4).
to place the call.
/
HOLD SAVE
/
TRANS PGM
.
/
HOLD SAVE

4.3.6 Using Automatic Called Number Redial (ACNR)

When making an external call and a busy signal is
received, the system can be set to retry the number until
the call is connected, the feature is cancelled, or the
maximum number of retries is attempted—this is
Automatic Called Number Redial (ACNR).
For each retry, the system will activate your speaker
then place the call with the microphone muted. When
the remote end answers, you must select the M
button, or lift the handset. Either of these actions will
button,
33
Issue 1
UTE
August, 2008