LIP-8012D & LIP-8024D User Guide
•
•
•
•
•
To unpair the BTU headset:
•
•
•
•
•
To check BTU paired information:
•
•
•
•
To use the BTU headset:
•
•
•
To answer a call with the BTU headset:
•
•
•
Press the
/
HOLD
Press the Next soft button,
Press the OK soft button,
Enter the PIN code referring to the Bluetooth headset
manual (default=0000),
Press OK Soft button.
Set the Bluetooth headset to pairing mode,
Press the
TRANS
Dial *8,
Dial 2 (disable),
Press the OK soft button.
Press the
TRANS
Dial *8,
Dial 3,
Press the OK soft button.
Press the S
PEAKER
OR
Press the Call Start button on the BTU headset,
Place call as you normally would.
When an incoming call is received, ringing will be
present at the Station and the BT headset,
Press the BT Call Start button, or press the Speaker
button,
OR
Lift the handset.
NOTE—When the BTU is used for a call, the Speaker
button LED will illuminate and the speaker mode
cannot be used. If the phone handset is taken off-
hook while in BT mode, the voice path will directly
be connected to the handset; press the Speaker
button to activate the BTU headset.
button,
SAVE
button,
/
PGM
button,
/
PGM
button,
12
Issue 1
August, 2008