LG-Nortel LIP-8012D User Manual page 33

LIP-8012D & LIP-8024D User Guide
To place an external call:
• Lift the handset,
• Dial the CO/IP line/group,
• Dial the desired number.
88 + Line number (01-42 for iPECS-100, or 001-
200 for iPECS-300 & 600).
CO/IP Group access—
801-820 for iPECS-100, or 801-872 for iPECS-
300 & 600
Any CO/IP Line access—
9
When dialing on a CO line which uses pulse style
signals, you may activate Dial Pulse to Tone
Switchover changing to DTMF style dialing (for banking
services, etc.).
When placing an IP call, you must dial an IP address
using the '*' key in place of the dot.
If Least Cost Routing is set-up, the number you dial
will be analyzed and the system will place the call on the
least expensive route.
You may be assigned Dialing and/or CO/IP Line
Access Restrictions, in which case you will receive
error tone if you attempt to dial or access a restricted
number/CO/IP line. CO/IP line and Station Class Of
Service (COS), which establish dialing restrictions, may
vary during Day and Night operation (Day/Night COS).
You may need to enter an
placing calls, in which case you will receive a second
dial tone.
Your external calls may be subject to Call Time
Restrictions, you will receive a Call Warning Tone
prior to disconnect.
NOTE—In the event of an emergency, assigned
Emergency numbers (ex., a 911 call) may be dialed
from any station in the System, regardless of a
Station's dialing restrictions (COS).
Authorization code
27
Issue 1
before
August, 2008