Hardware Overview; Front Panel Led's - Buffalo AirStation NFINITI WHR-HP-G300N User Manual

Chapter 1 Product Overview

Hardware Overview

Front Panel LED's

5
ROUTER LED (Green)
6
DIAG LED (Red)
WHR-HP-GN / WHR-HP-G300N User Manual
1
AOSS Button
Hold down this button until the Security LED flashes (aprox. 1
second),while the unit's power is on, initiates AOSS/WPS
mode, allowing the unit to exchange security keys with AOSS
or WPS compatible devices.
1
2
POWER LED (Green)
On:
2
Off:
3
3
SECURITY LED (Amber)
4
Indicates security status.
Off:
5
On:
Double blink:
6
Blinking: AOSS/WPS error; failed to exchange security keys
Note: When the Security LED is lit, an encryption key has
been set. You can verify that the encryption key has
been set in the web configuration screen on page 40.
4
WIRELESS LED (Green)
Indicates wireless LAN status.
Blinking: Wireless LAN is transmitting
On:
On: Router functionality is enabled
Blinking: Router functionality is disabled
This indicates the status of this unit depending on the number of
blinks per cycle.
Note: When the unit is first turned on or restarted, the Diag LED will
blink for almost a minute during boot. This is normal.
The AC adapter is connected
The AC adapter is not connected
Encryption is not set
Encryption has been set
The unit is waiting for an AOSS or WPS
security key
Wireless LAN is connected but not active
8