Buffalo AirStation NFINITI WHR-HP-G300N User Manual page 18

Chapter 3 Installation
5
Connect you computer to one of the AirStation's LAN ports with the LAN cable.
Turn on the AirStation, wait one minute, and then turn on your computer.
AirStation wireless router
(rear side)
power outlet
6
Confirm the devices are connected correctly as the below diagram shows.
computer
power outlet
7
Wait for a while, and then make sure that the AirStation's LEDs are lit as described below:
POWER
WIRELESS
ROUTER
DIAG
LAN
INTERNET
※ Refer to page 8 and 10 for LED locations and other details.
8
Launch a web browser. If the "home" setup screen is displayed, setup is complete.
If a user name and password screen is displayed, enter "root" (in lower case) for the user name,
leave the password blank, and click "OK". Follow the instructions on the screen to complete
setup.
You've completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.
WHR-HP-GN / WHR-HP-G300N User Manual
1) connect
ROUTER
ON
OFF
AUTO
LAN
1) connect
LAN cable
INTERNET
POWER
2) connect the power supply
ON
modem
Green light is on
Green light is on or blinking
Green light is on or off depending on your network
Off
Green light is on or blinking
Green light is on or blinking
PC
17