Buffalo AirStation NFINITI WHR-HP-G300N User Manual page 30

Chapter 4 Configuration
Parameter
PPPoE Connection No. *-Add
Preferred PPPoE Connection -Add
WHR-HP-GN / WHR-HP-G300N User Manual
Meaning
Keep Alive
When enabling Keep Alive, the AirStation issues LCP echo request
in order to maintain the connection with the PPPoE server once
a minute. If the server does not respond more than 6 minutes
the line is recognized as disconnected and the AirStation
will terminate the connection. If a PPPoE connection is often
disconnected, the server may not reply to Keep Alive. Set this to
"Disable."
This is displayed when clicking "Edit Preferred Connections".
Name
The name of destination to connect by PPPoE if "Destination
address" and "Source address" of the communication match. Select
the destination registered to PPPoE Connection List.
Destination address
Destination address to communicate. When communicating to
this destination address, the AirStation will communicate with
"Name of Connection. "
Source address
Source address to communicate. When communicating from this
source address, the AirStation will communicate with "Name of
Connection."
29