Buffalo AirStation NFINITI WHR-HP-G300N User Manual page 29

Chapter 4 Configuration
Parameter
PPPoE Connection No.*-Add
Preferred Connections
[Edit Preferred Connections]
WHR-HP-GN / WHR-HP-G300N User Manual
Meaning
This is displayed when clicking "Edit Connection List".
Name of Connection
Enter the name to identify the connected destination. You may
enter up to 32 alphanumerical characters and symbols.
User Name
Set the user name which is specified by your provider, used for
a PPPoE certification. You may enter up to 32 alphanumerical
characters and symbols.
Password
Set the password specified by your provider for PPPoE
certification. You may enter up to 32 alphanumerical characters
and symbols.
Service Name
Fill in this field only when your provider specifies a Service Name.
Leave blank otherwise. You may enter up to 32 alphanumerical
characters and symbols.
Connection Type
Specifies the timing for the AirStation to connect to your provider.
Automatic disconnection
Set time to disconnect after communication is stopped when the
connection method is set to "Connect on Demand" or "Manual".
You can enter up to 1440 minutes.
Authorization
Configure an authorization method with a provider.
MTU Size
Configure MTU value in the range of 578 to 1492, which is used
for communication on PPPoE.
MRU Size
Configure MRU (Maximum Receive Unit) value in the range of578
to 1492, which is used for communication on PPPoE.
Displays information you have set regarding to the connection
destination route.
Click this button to display the screen to edit the settings of
connection destination route.
28