Buffalo AirStation NFINITI WHR-HP-G300N User Manual page 44

Chapter 4 Configuration
Parameter
Broadcast SSID
[Use Multi Security function]
[Do not use Multi Security function]
SSID1
SSID2
SSID3
Separate feature
SSID
Wireless authentication
WHR-HP-GN / WHR-HP-G300N User Manual
Meaning
If "Allow" is checked, then the AirStation will respond to SSID
searches from wireless devices by broadcasting its SSID. If "Allow" is
unchecked, then the AirStation ignore SSID searches from wireless
devices.
Clicking "Use Multi Security function" will enable the Multi Security
function, allowing the use of multiple SSIDs, each with different
wireless security settings. Clicking "Do not use Multi Security
function" will disable the Multi Security function. The AirStation will
then allow one SSID and one type of wireless security.
Note: When using Multi Security, you need to enable at least one of the
following SSID1, SSID2, or SSID3.
Multi Security SSID1 can use WPA-PSK-TKIP or WPA/WPA2-Mixed for
wireless security.
Multi Security SSID2 can use WPA-PSK-AES for wireless security.
Multi Security SSID3 can use WEP for wireless security.
When "Enabled", wireless devices connected to the AirStation can
communicate only with the Internet side, not with each other.
Set SSID using 1-32 alphanumeric character (s).
Specifies an authentication method used when connecting to a
wireless device.
43