Chapter 4 Configuration
QoS (Router Mode only)
The screen to configure the priority control of packets sent to the Internet.
Parameter
QoS for transmission to the Internet
Upload bandwidth
Enable
application name
protocol
WHR-HP-GN / WHR-HP-G300N User Manual
Meaning
Determine whether or not control the priority of packets to send to
the Internet. Check this box to enable QoS.
Specify the upstream bandwidth in kbps from the AirStation to the
internet side.
* Set the actual value for the upstream bandwidth.
Enable or disable this entry.
Enter an application name. Names may use up to 32 alpha
numerical characters, double or single tick marks ("'), quotation
marks ("), and semicolons (;).
Select either TCP or UDP.
60