Yamaha MOXF8 Reference Manual page 63

VOICE PERF
InsEF Connect (Insertion Effect Connection)
Determines the effect routing for Insertion Effects A and B. The setting changes are shown on the diagram in the display,
giving you a clear picture of how the signal is routed.
Settings:
insA>B, insB>A
insA>B..................................... Signals processed with Insertion Effect A will be sent to Insertion Effect B and signals
insB>A..................................... Signals processed with Insertion Effect B will be sent to Insertion Effect A and signals
[SF3] INS A (Insertion Effect A)
[SF4] INS B (Insertion Effect B)
These displays consist of multiple pages and can be selected by pressing the Cursor [<]/[>] buttons. From these
displays, you can also set each parameter of the selected Effect type individually and manually.
Category
Type
Determines the category and type for the selected effect.
Settings:
For details on the editable Effect categories and types, see the "Data List" PDF document. Also, for details on the description
for each Effect type, see the "Synthesizer Parameter Manual" PDF document.
Preset
This lets you call up pre-programmed settings for each Effect type, designed to be used for specific applications and
situations. You can change how the sound is affected by the selected pre-programmed settings.
NOTE
For a list of all Preset Effect Types, see the "Data List" PDF document.
Effect Parameters
The effect parameter differs depending on the currently selected effect type. For details on the editable Effect
parameters in each Effect type, see the "Data List" PDF document. Also, for detailed descriptions for each Effect
parameter, see the "Synthesizer Parameter Manual" PDF document.
[F6] EFFECT
[SF1] CONNECT
The Insertion connection type depends on the setting of the Voice assigned to the selected Part. This display sets the
System Effect applied to all parts.
Chorus Ctg (Chorus Category)
Chorus Type
Reverb Type
Determines the category and type for the Chorus effect and Reverb effect.
Settings:
For details on the editable Effect categories and types, see the "Data List" PDF document. Also, for detailed descriptions for
each Effect type, see the "Synthesizer Parameter Manual" PDF document.
Chorus Return
Reverb Return
Determines the Return level of the Chorus/Reverb Effect.
Settings:
0 – 127
Chorus Pan
Reverb Pan
Determines the pan position of the Chorus/Reverb effect sound.
Settings:
L63 (far left) – C (center) – R63 (far right)
Chorus To Reverb
Determines the Send level of the signal sent from the Chorus Effect to the Reverb Effect.
Settings:
0 – 127
MOXF6/MOXF8 Reference Manual
SONG PATTERN MIX
processed with Insertion Effect B are sent to Reverb and Chorus.
processed with Insertion Effect A are sent to Reverb and Chorus.
MASTER REMOTE UTILITY QUICK SET FILE
Performance Mode
Performance Play
[F1] PLAY
[F2] VOICE
[F3] PORTA
[F4] EG
[F5] ARP ED
[F6] EFFECT
Arpeggio Edit
[F1] COMMON
[F2] TYPE
[F3] MAIN
[F4] LIMIT
[F5] PLAY FX
[F6] OUT CH
Performance Edit
Common Edit
[F1] GENERAL
[F2] OUT/MFX
[F3] MEQ
[F4] USB I/O
[F5] A/D IN
[F6] EFFECT
Part Edit
[F1] VOICE
[F2] OUTPUT
[F3] EQ
[F4] TONE
[F5] RCV SW
Performance Job
[F1] INIT
[F2] RECALL
[F3] COPY
[F4] BULK
Performance Record
[F1] SETUP
[F2] REC TR
[F3] OTHER
[F5] CLICK
[F6] INFO
Supplementary Information
63