Yamaha MOXF8 Reference Manual page 20

In the Performance mode
Performance
Part EQ
Voice
Insertion A/B
Part 1 – 4
Send Level
A/D Part
Reverb
Return Level
Master
Effect
Master EQ
In the Mixing mode
Mixing
Part
Voice
Part EQ
Insertion A/B
Part 1 – 16
Send Level
A/D Part
Reverb
Return Level
Master
Effect
Master EQ
MOXF6/MOXF8 Reference Manual
Part EQ applied to each Part
Settings: Set in the EQ display
Selection of the Parts to which the Insertion Effect is
applied
Settings:
Set in the INS SW display
Common Edit.
Reverb and Chorus related parameters
Chorus
Settings: Set in the CONNECT display
and REVERB display
Edit, and the EF SEND display
Edit.
Chorus
To Reverb
Master Effect related parameters
Settings:
Set in the MFX display
Edit.
Master EQ related parameters
Settings: Set in the MEQ display
Edit.
NOTE
Regarding the audio input signal from the A/D INPUT [L]/[R] jacks in
the Performance mode, the effect is set in the A/D IN display of
Performance Common Edit. First, set the Insertion Effects. Then,
making sure that "Mode"
USB I/O display of the Utility mode, set the level of the signal sent to
Chorus and Reverb. When "Mode" is set to "VST" or "2StereoRec,"
the signal which is output from the Insertion Effect will be directly
output to the USB [TO HOST] terminal or OUTPUT [L/MONO]/[R]
jacks.
Part EQ applied to each Part
Settings:
Set in the EQ display
Selection of the Parts to which the Insertion Effect is
applied
Settings:
Set in the EFFECT display
Edit.
Reverb and Chorus related parameters
Chorus
Settings:
Set in the EFFECT display
Edit.
Master Effect related parameters
Chorus
To Reverb
Settings: Set in the MFX display
Master EQ related parameters
Settings:
Set in the MEQ display
NOTE
Regarding the audio input signal from the A/D INPUT [L]/[R] jacks in
the Song/Pattern mode, the effect is set in the A/D IN display of the
Mixing Common Edit. First, set the Insertion Effects. Then, making
sure that "Mode"
display of the Utility mode, set the level of the signal sent to Chorus
and Reverb. When "Mode" is set to "VST" or "2StereoRec," the
signal which is output from the Insertion Effect will be directly output
to the USB [TO HOST] terminal or OUTPUT [L/MONO]/[R] jacks.
(page 67) of Performance Part Edit.
(page 64) of Performance
(page 63), CHORUS display
(page 64) of Performance Common
(page 66) of Performance Part
(page 60) of Performance Common
(page 61) of Performance Common
(page 146) is set to "1StereoRec" in the
(page 118) of Mixing Part Edit.
(page 116) of Mixing Common
(page 116) of Mixing Common
(page 116) of Mixing Common Edit.
(page 116) of Mixing Common Edit.
(page 146) is set to "1StereoRec" in the USB I/O
Basic Structure
Functional blocks
Tone Generator block
A/D Input block
Sequencer block
Arpeggio block
Controller block
Effect block
Internal memory
Reference
Voice mode
Performance mode
Song mode
Pattern mode
Mixing mode
Master mode
Remote mode
Utility mode
Quick setup
File mode
Using iOS Applications
Appendix
MIDI
20