Yamaha MOXF8 Reference Manual page 135

VOICE PERF
Operating by the Function buttons
The functions of the DAW software can be operated by the Function buttons and Sub Function buttons. When "DAW
Select" is set to "Cubase," the appropriate functions of Cubase are assigned to the buttons. This section explains about
the specific functions for the Function buttons when "DAW Select" is set to "Cubase."
NOTE
When "DAW Select" is set to something other than Cubase, the functions assigned to the Function buttons may not be
appropriate. Before using the Function buttons, assign desired functions to the Function buttons on the DAW software. Please
note that these buttons don't work when "DAW Select" is set to Digital Performer.
Functions for the Function buttons
When "DAW Select" is set to "Cubase," the following fixed functions are assigned to the [F1] – [F6] buttons.
Buttons Panel Indication
F1 ADD INST TRACK
F2 VSTi WINDOW
F3 EDIT CH SET
F4 AUTOMATION READ
F5 AUTOMATION WRITE
F6 DELETE
Functions for the Sub Function buttons
The [SF1] – [SF6] buttons can be assigned freely to any desired function. When "DAW Select" is set to "Cubase," you
can use six memories to which functions assigned to the [SF1] – [SF6] buttons are registered. You can register the
functions for the [SF1] – [SF6] buttons to each memory. To switch among Memory settings 1 – 6, use the [A] – [F]
buttons on the MOXF6/MOXF8 panel. The functions assigned to the Sub Function buttons can be edited in the MOXF6/
MOXF8 Extension Setup window in Cubase
MOXF6/MOXF8 Reference Manual
SONG PATTERN MIX
Opens/closes the [Add Instrument Track] dialog.
Opens/closes the VSTi display for the selected Track.
Opens/closes the settings window for the channel of the selected Track.
Switches Automation Read for the selected Track on or off.
Switches Automation Write for the selected Track on or off.
Delete
(page 136).
MASTER REMOTE UTILITY
Functions
QUICK SET FILE
Remote Mode
Remote display
Remote Control Assignments
135