Dst On/Off Setting; Radio-Controlled Time On/Off Setting; 12/24-Hour Time Mode Setting - La Crosse Technology WS-8035 Instruction Manual

5. Press and release the "+" button to select the desired time zone.
6. Press and release the "SET" button to confirm the Time Zone
setting and continue to the DST ON/OFF setting.
D. DST ON/OFF Setting
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button twice more to advance to the

DST ON/OFF setting.

4. "DST" will appear to the right of the Moon Phase display and
"ON" or "OFF" will flash above that.
5. Press and release the "OUT/+" button to select DST ON/OFF.
Note: Some locations (Arizona and parts of Indiana) do not follow Daylight
Saving Time.
6. Press and release the "SET" button to confirm the DST ON/OFF
setting and continue to the Radio-controlled Time ON/OFF setting.
E. Radio-controlled Time ON/OFF Setting
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button three more times to advance to
the Radio-controlled time ON/OFF setting.
4. "RCC" will appear to the right of the Moon Phase display and
"ON" or "OFF" will flash above that.
5. Press and release the "+" button to select Radio-controlled time
ON/OFF setting.
6. Press and release the "SET" button to confirm the Radio-
controlled time ON/OFF setting and continue to the 12/24-hour
Time Mode setting.
F. 12/24-hour Time Mode
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button four more times to advance to
the 12/24-hour time mode setting.
4. "12h" or "24h" will flash to the right of the Moon Phase display.
5. Press and release the "OUT/+" button to select 12 or 24-hour time
mode.
Note: In 12h mode "PM" will appear to the left of the time during PM hours.
If the time is not within the PM hours nothing will be displayed. Be sure to set
the time to the correct AM/PM time to ensure automatic reception.
9