Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for La Crosse Technology WS-8300U
Summary of Contents for La Crosse Technology WS-8300U
- Page 1 WS-8300U 915 MHz Wireless Weather Station Instruction Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction……………………………………………………………………………………..3 Inventory of Contents…………………………………………………………………………4 Quick Set Up……………………………………………………………………………………4 Detailed Set Up………………………………………………………………………………4-5 Battery Installation…………..………………………………………………………..4-5 12 or 24 Hour Time Display………..…………………………………………………..5 Time Setting………..……..…………………………………………………………….5 Features……………………………………………………………………………………….6-7 Minimum & Maximum Temperature and Humidity……………………..……………6 Resetting Minimum & Maximum Temperature and Humidity………..…………….6 Adding Additional Thermo-Hygro Sensors……………………………..…………….6 Viewing &... - Page 3 INSTANT TRANSMISSION is the state-of- the-art wireless transmission technology, exclusively designed developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the sensors: follow your climatic variations in real-time! Outdoor Temperature (°F or °C)
-
Page 4: Inventory Of Contents
Set/Channel MIN/MAX / + Button Button Wireless Thermo-hygro Sensor INVENTORY OF CONTENTS 1. Wireless Weather Station (Figure 1) 2. Wireless Thermo-Hygro Sensor (TX21U) and mounting bracket. (Figure 2) Mounting 3. 3 each, 1/2” Philips screws. Bracket 4. One strip of double sided adhesive tape. 5. -
Page 5: Detailed Set Up
temperatures after the 15 minutes, please retry the set up as stated above. After both indoor and outdoor temperatures are displayed for 15 minutes you can place your thermo-hygro sensor outdoors, and set your time. The remote temperature sensor should be placed in a dry, shaded area. The remote temperature sensor has a range of 330 feet. -
Page 6: Or 24 Hour Time Display
A. THERMO-HYGRO SENSOR 1. Remove the Protective Rain Cover. 2. Remove the Battery Cover. 3. Observing the correct polarity, install 2 “AA” Alkaline Batteries—make sure they do not spring free, or start-up problems may occur. Replace the Battery Cover. Rain protection cover Battery Cover... -
Page 7: Time Setting
MIN/MAX button for 5 seconds. C. ADDING ADDITIONAL REMOTE SENSORS (OPTIONAL) The WS-8300U is able to receive signals from 2 additional thermo-hygro sensors . The following are instructions for the set-up of thermo-hygro sensor units with the WS- 8300U. -
Page 8: Mounting
displayed. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. 4. The outdoor temperature and humidity from the first sensor (channel 1) should then be displayed on the Weather station. If this does not happen and the signal reception icon is not shown, after 2 minutes, the batteries will need to be removed from both units and reset from step 1. -
Page 9: Troubleshooting
Gently pull the Wireless Weather Station down to lock the screw into place. TROUBLESHOOTING NOTE: For problems not solved, please contact La Crosse Technology via e-mail or phone, or visit our website, www.lacrossetechnology.com Problem: The LCD is faint Solution: Replace batteries Problem: No outdoor temperature is displayed. -
Page 10: Specifications
• Do not subject the units to unnecessary heat or cold by placing them in the oven or freezer. • Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs. SPECIFICATIONS Transmitting... -
Page 11: Warranty Information
Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. - Page 12 State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information contact: La Crosse Technology, Ltd 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610...