Time Zone Setting; Dst On/Off Setting; Radio-Controlled Time On/Off Setting; 12/24-Hour Time Mode Setting - La Crosse Technology WS-7394U-IT Instruction Manual

C. Time Zone Setting
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button once more to advance to the

Time Zone setting.

4. A number will flash to the left of the letter "h" at the top of the display
just below the time display.
5. Press and release the "OUT+" button to select the desired time
zone.
6. Press and release the "SET" button to confirm the Time Zone set-
ting and continue to the DST ON/OFF setting.
D. DST ON/OFF Setting
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button twice more to advance to the

DST ON/OFF setting.

4. "DST" will appear above the indoor temperature/humidity display
and "ON" or "OFF" will flash above that.
5. Press and release the "OUT/+" button to select DST ON/OFF.
Note: Some locations (Arizona and parts of Indiana) do not follow
Daylight Saving Time.
6. Press and release the "SET" button to confirm the DST ON/OFF
GB
P.10
setting and continue to the radio-controlled Time ON/OFF setting.
E. Radio-Controlled Time ON/OFF Setting
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button three more times to advance to
the radio-controlled time ON/OFF setting.
4. "RCC" will appear above the indoor temperature/humidity display
and "ON" or "OFF" will flash above that.
5. Press and release the "OUT/+" button to select radio-controlled time
ON/OFF setting.
6. Press and release the "SET" button to confirm the radio-controlled
time ON/OFF setting and continue to the 12/24-hour Time Mode
setting.
F. 12/24-hour Time Mode
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button four more times to advance to
the 12/24-hour time mode setting.
4. "12h" or "24h" will flash above the indoor temperature/humidity
display.
5. Press and release the "OUT/+" button to select 12 or 24-hour time
mode.
GB
P.11