Grandstream Networks GXP1100 User Manual page 34

DNS Server 2
Preferred DNS server
802.1x mode
Identity
MD5 Password
HTTP Proxy
HTTPS Proxy
Multi Purpose Key X
(X: 1 - 4)
Time Zone
Self-Defined Time Zone
FIRMWARE VERSION 1.0.4.23
Enter the DNS Server 2 for IPv6.
Enter the Preferred DNS Server for IPv6.
Allows the user to enable/disable 802.1x mode on the phone. The
default value is disabled. To enable 802.1x mode, this field should be set
to EAP-MD5.
Enter the Identity for the 802.1x mode.
Enter the MD5 Password for the 802.1x mode.
Specifies the HTTP proxy URL for the phone to send packets to. The
proxy server will act as an intermediary to route the packets to the
destination.
Specifies the HTTPS proxy URL for the phone to send packets to. The
proxy server will act as an intermediary to route the packets to the
destination.
Assigns a function to the corresponding multi-purpose key. The key
mode options are:
•
Speed Dial
Enter the Speed Dial number in UserID field to be dialed.
•
Dial DTMF
Enter a series of DTMF digits in UserID field to be dialed during the
call. "Enable MPK Sending DTMF" (under Advanced Setting) has to
be set to "Yes" first.
•
VMsg
Enter the Voice Mail access number in the UserID field.
•
Call Return
The last answered calls can be dialed out by using Call Return. The
Name and UserID should be left blank.
•
Transfer
Enter the number in the UserID field to be transferred (blind transfer)
during the call.
•
Intercom
Enter the extension number in the UserID field to do the intercom.
•
3-way Conference
Press to establish 3-way conference. The Name and UserID should
be left blank.
Configures the date/time on the phone according to the specified time
zone.
This parameter allows the users to define their own time zone.
The syntax is: std offset dst [offset], start [/time], end [/time]
GXP1100/GXP1105 USER MANUAL Page 34 of 46