Table of Contents
Advertisement
1.5 Starting Up
After installing your SIM card and battery and charging the battery, you can now
power on and start using your device.
Turn your device on and off
To turn on the power
1.
Press and hold the POWER button for a few seconds.
2.
When you turn on your device for the first time, a Quick Start Wizard guides
you to set up regional settings, date and time, and password. For more
information about these settings, see Chapter 1. After the Quick Start Wizard
finishes, the device installs customization settings and then restarts.
To turn off the power
1.
Press and hold the POWER button for a few seconds.
2.
Tap Yes when a message prompts you to choose whether or not to turn off
the device completely.
Auto configure the data connection settings
The first time you power on your device, you will see a notification message from
Connection Setup. Connection Setup automatically configures your device's data
connections, such as G/GPRS, WAP, and MMS, so that you do not need to enter the
settings manually for your device.
To automatically configure data connection settings
1.
When you see the notification message from the Connection Setup, tap Yes.
Getting Started 5
Advertisement
Table of Contents
