Tray Settings - Dell C2660dn User Manual

Reset Defaults
Initialize Print Meter
Non-Dell Toner On
Off
Adjust Altitude 0 meter
1000 meters
2000 meters
3000 meters
Apply New Settings
Restart printer to apply new settings

Tray Settings

Purpose:
To specify the paper types and sizes, and the tray priority for the MPF, tray1, and the optional 550-sheet feeder
respectively.
Values:
Tray Settings MPF Mode
MPF Display
*1
Popup
MPF Paper Size
MPF Custom Size ­
*1
Y
MPF Custom Size ­
*1
X
MPF Paper Type
Panel Specified
Driver Specified
On
Off
*1
Use Driver Settings
A4 (210x297mm)
A5 (148x210mm)
B5 (182x257mm)
Letter (8.5x11")
Folio (8.5x13")
Legal (8.5x14")
Executive (7.3x10.5")
Envelope #10 (4.1x9.5")
Monarch Env. (3.9x7.5")
DL Env. (110x220mm)
C5 Env. (162x229mm)
Custom Size
Available Range:
127–355 mm (5.0–14.0 inches)
Available Range:
77–215 mm (3.0–8.5 inches)
*1
Plain
Initializes the system parameters.
Click Initialize Print Meter to initialize the Print
Meter.
Enables the use of another manufacturer's toner
cartridge.
Disables the use of another manufacturer's toner
cartridge.
Sets the altitude of the location where the printer
is installed.
After you change the settings, click this button to
apply the changes.
Click this button to apply the changes.
Sets whether the paper size and paper type for the
MPF are specified from the printer driver or the
operator panel.
Displays a popup message that prompts the user to
set Paper Type and Paper Size when the paper is
loaded in the MPF.
Sets the size of paper loaded in the MPF.
Sets the length of custom size paper loaded in the
MPF.
Sets the width of custom size paper loaded in the
MPF.
Sets the type of paper loaded in the MPF.
Understanding the Tool Box Menus
155