Programming Your Handset
The 900 MHz handset has 6 programmable function
keys (F1 to F6).
The F1 to F4 keys are back lighted, so these keys
can be programmed as Feature Function (FF) keys.
F2
F1
F3
F4
Note: When used with the DBS 96/72/90 and
the DBS 824, LED indications of calls are only
available if the handset and desk telephone FF
Keys are programmed as CO keys.
Note: For detailed programming instructions,
see your key telephone user manual. A large-
display key telephone is recommended for
programming.
1. To enter the 900 MHz handset programming
mode from standby mode, press and hold the
*
and
press the TALK button. You will hear a beep
900 MHz Cordless Telephone User Guide
#
buttons. While holding those buttons,
F6
F5
31