Using Your 900 MHz Cordless Telephone
B
EFORE
•
Ensure that your 900 MHz phone has been
installed as described in "Installing the 900 MHz
Cordless Telephone" on page 9 .
•
Remove the handset from the charging unit
before using the handset.
•
Raise the base
station antenna to
the vertical position.
•
Ensure that the
"CORDLESS" LED
on the base station
is lit.
Note: When you pick up the
handset and press TALK, you
may see this message
momentarily:
This message disappears when the base station
obtains an open line from the PBX.
P
LACING A
1. Press TALK . You will hear a dial tone.
2. Enter the number you are calling.
3. To end the call, press TALK .
900 MHz Cordless Telephone User Guide
Y
B
OU
EGIN
C
ALL
Cordless
LED
ACQUIRING
LINK
21