Table of Contents
Advertisement
W
-M
ALL
(O
PTIONAL
Standard Wall Plate Mounting
You can use this mounting option if you have a
standard AT&T or GTE wall plate connection to the
Panasonic PBX.
1. Slide the Wall Mount
Adapter into the
notches at the top of
the base station.
Rotate the Wall
Mount Adapter down
and snap it into place.
2. Plug the AC Adapter
(EXP9704) into the
base station.
3. Place the AC Adapter
cord inside the molded channel of the Wall
Mount Adapter.
4. Plug a short telephone cord into the LINE IN jack
on the base station. Connect a telephone cord
from a Panasonic key telephone to the LINE
OUT jack. Then place the telephone cord(s)
inside the molded channel(s) on the bottom of
the Wall Mount Adapter.
900 MHz Cordless Telephone User Guide
Installing the 900 MHz Cordless Telephone
OUNTING THE
P
ROCEDURE
B
S
ASE
TATION
)
15
Advertisement
Table of Contents
