7. Remove the screw that secures the front audio and USB assembly. Then, remove the front audio
and USB assembly from the chassis.
Figure 91. Removing the front audio and USB assembly
8. Install the new front audio and USB assembly into the chassis until it snaps into position. Then, push the
new front audio and USB assembly to the left until the screw hole in the metal bracket of the front audio
and USB assembly is aligned with the corresponding hole in the chassis.
Figure 92. Installing the front audio and USB assembly
9. Connect the cables of the new front audio and USB assembly cables to the front audio connector and
the front USB connector 1 on the system board. See "Locating parts on the system board" on page 14.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
86
ThinkCentre M83, M93/p User Guide