Lenovo 10A2 User Manual page 85

4. Press the retaining clip
same time.
Figure 70. Pivoting the drive bay assembly upward
5. Locate the primary hard disk drive. See "Locating internal drives" on page 17.
6. Disconnect the signal cable and the power cable from the primary hard disk drive.
7. Pull on the blue handle to slide the primary hard disk drive out of the drive bay.
Figure 71. Removing the primary hard disk drive
8. Flex the sides of the blue bracket to remove the primary hard disk drive from the bracket.
1 in the direction as shown and pivot the drive bay assembly upward at the
.
Chapter 5 Installing or replacing hardware
73