Replacing The Heat Sink And Fan Assembly - Lenovo 10AQ Maintenance Manual

Figure 62. Pivoting the drive bay assembly upward
5. To lower the drive bay assembly, press the drive bay assembly clip
assembly downward as shown.
Figure 63. Lowering the drive bay assembly

Replacing the heat sink and fan assembly

CAUTION:
The heat sink and fan assembly might be very hot. Turn off the computer and wait three to five
minutes to let the computer cool before removing the computer cover.
1 inward and pivot the drive bay
.
Chapter 10 Replacing FRUs (machine type: 10AQ)
129