Accessing The System Board Components And Drives - Lenovo 10AQ Maintenance Manual

Figure 61. Reinstalling the front bezel
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 169.

Accessing the system board components and drives

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
in the Safety, Warranty, and Setup Guide that came with your computer. To obtain a copy of the Safety, Warranty, and
Setup Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to access the system board components and drives.
To access the system board components and drives, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 126.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 127.
4. Pivot the drive bay assembly upward to access all the internal drives, cables, and other components.
128
ThinkCentre E93 Hardware Maintenance Manual