One for All Easy 3 series User Manual

URC 3030
3031 / 3032 / 3033 / 3034

User Manual

Previous Model Name: So Easy
Features and Functions
The illustration below and chart on the next page describe the
features and functions of the One For All® Easy 3 Device
universal remote control.
Setup
Key
SETUP
TV Key
TV
Volume
and
Channel
Glow Keys
VOL
2
Record
REC
Key
REW
Rewind
Key
Stop Key
Easy 3
Red Light
(LED)
Power
Key
POWER
CBL
VCR
3
CH +
1
CBL Key
VOL
M
CH -
4
Mute
Glow Key
PAUSE
PLAY
FF
STOP
Fast
Forward
Key
Play Key
Feature
RED Light (LED)
TV VCR
POWER
SETUP
3
CH +
VOL
M
2
CH -
VCR Key
REW FF
PLAY PAUSE
Overview:
Thank you for purchasing the One For All® Easy 3 Device
universal remote. Before you can use your new
remote, you will need to program it. To do this, you need to tell
the remote what equipment you wish to operate. This is done by
following these three easy steps.
Pause Key
Step 1:
Step 2:
Step 3:
Function
The LED flashes red to show that the
remote is working.
The TV, VCR and CBL keys are used to
select the home
CBL
entertainment device you want to control.
The POWER key operates the same as on
your original remote.
The SETUP key is used to set up your
devices.
The Glow Keys: VOL (Volume), CH
(Channel), and M (Mute) operate the same
1
as on your
VOL
original remote. To activate the "Glow"
Feature, you must expose the Glow Keys
4
to bright light. The length of time the
Glow Keys remain illuminated will be
determined by the length of time the
remote is exposed to bright light. These
keys are also used to enter set-up codes for
your devices.
The REW (Rewind), FF (Fast Forward),
STOP, PLAY, PAUSE and REC (Record)
STOP
keys control the same functions as those
found on your VCR remote.
REC
Install two (2) new AAA alkaline batteries.
Look up the code for your TV, VCR or Cable Box.
Enter the code.