Factory Defaults - Miele G 4281 Operating Instructions Manual

Additional options

Factory defaults

If you have changed any settings, you
can reset them to the factory defaults.
^ Open the door.
^ Press the K button to turn the
dishwasher off.
^ Press and hold the Program button
and simultaneously turn the
dishwasher on using the K button.
Keep the Program button pressed for
at least four seconds until the lower
right program indicator lights up.
If it does not come on, start over.
^ Press the Turbo button 12 times.
The Turbo indicator shows 1 long flash
and 2 short flashes in intervals.
36
The flashing in the time display shows
whether a setting is different from the
default setting.
– "p 1": all values are set to the default
settings.
– "p 0": at least one setting has been
changed.
^ Press the Program button to reset the
dishwasher to the factory defaults.
The setting is immediately saved.
^ Press the K button to turn the
dishwasher off.