Factory Defaults - Miele G 5056 Operating Instructions Manual

Factory defaults

If you have altered any settings, you
can reset them back to the factory de-
fault settings.
 Open the door.
 Turn the dishwasher off with the
 button, if it is turned on.
 Press the  button in and, while
holding it in, turn the dishwasher on
using the  button.
Keep the  button pressed in for at
least 4 seconds until the  indicator
light comes on.
If this does not happen, start the proce-
dure from the beginning again.
Program options
 Press the Program button 19 times.
The top left program indicator light will
emit 1 long flash and 9 short flash at in-
tervals.
The flashing sequence in the time dis-
play indicates whether the setting devi-
ates from the factory default:
-  : all values are factory default set-
tings.
-  : at least one setting has been
changed.
 To reset the dishwasher to the factory
default settings, press the  button.
The setting is now saved.
 Turn the dishwasher off with the
 button.
55